As the "smart" central control device, Energy Kinetics' Display Energy Manager provides continuous system monitoring and simple diagnostics for a virtually maintenance-free, combined heat and hot water system. The display provides additional system information and diagnostics.
Five zone control options allow for multi-zone thermostat settings-resulting in added comfort and overall energy savings for homeowners.
Installation is simple: The factory pre-wired harness and quick menu driven settings save valuable installation and system set up time. The installer simply brings in power, and connects thermostat and zone valve wires. That’s it.
Menu Setup Options
Menu option settings customize the display energy manager for each home installation. Installers can enable hot water priority, set smart boost to automatically adjust for zone temperature requirements, set individual zone energy recovery control to best suit each home’s needs, and enable multi-purge to recover energy to multiple zones. And all Energy Kinetics’ oil fired heating systems are also fuel neutral, so they operate with natural gas, oil heat, or propane (only a simple burner kit is required to change between gas and oil fuels).
Quick Start Video and Installation Guide
Compare to Temperature Reset Controls
The Display Energy Manager is responsive to cold returns from large or small water volume systems, and always maintains safe minimum boiler temperatures. Unlike temperature reset controls, the Display Energy Manager with Hybrid Energy Recovery® is not dependent upon complicated trial and error adjustments to operate at peak performance. Energy Kinetics’ Hybrid Energy Recovery also outperformed temperature reset operation and modulating condensing boiler technology in the Department of Energy’s Brookhaven National Laboratories testing.
Factory Pre-wired Harness
Every System 2000, 90+ Resolute™, and Accel CS™ comes with clean internal wiring, instructions and clearly marked terminals. The Display Energy Manager includes spare or readily available plug-in relays, has separate on/off switches for system power and burner, and even more to complete a very service friendly package.
The Display Energy Manager is a very powerful diagnostic tool that can test all manager functions in less than 2 minutes. It also displays useful information, thermostat connections, and outputs (zone connections). The manager cannot cause a burner lockout.
The Manager Service Board works with the Display Energy Manager, the Digital Energy Manager, and the Classic Manager. The instructions are printed right on the front of the board.
This ingenious tool allows System 2000 and 90+ Resolute to run in “conventional boiler mode,” so the burner, zones, circulator and entire system operate just like a common “maintain temperature” boiler (including lower efficiency operation without Energy Recovery). Troubleshooting is easy for any heating professional with boiler and burner experience, and there’s no need to know anything about the manager controls to work on the system.
The service board also allows the boiler to run if the manager is damaged or is not functioning properly. Be assured that the manager is very durable and virtually maintenance free-if you ever suspect there is a problem, heating professionals should review the diagnostic video and contact Energy Kinetics if a problem is identified.
You and your customers can have peace of mind because the Display Energy Manager comes with a five year part warranty which includes a lifetime protection – no product registration is required!
The Digital Energy Manager is very similar to the Display Energy Manager. It has temperature bars instead of a display. Flashing bars indicate corrective action conditions. Visit the below link to find out more about the Digital Energy Manager.
The Classic System Manager was the precursor to the Digital Energy Manager, and monitors the need for heat, both in living areas and in the hot water storage tank.