Integrity™ and Integrity™ Combi Condensing Boilers
Simply Smarter and Built to Last Longer! Integrity’s Superior Boiler Design Makes it the Most Durable, Reliable, and Efficient Condensing Boiler.
Lower Your Fuel Bills While Enjoying Nearly Endless Hot Water
Integrity is one system for both heat and hot water. Combining several Energy Kinetics’ developed breakthrough technologies, including Hybrid Energy Recovery®, SmartBoost™, Sealix® hot water heat exchangers with our industry-leading boiler design, Integrity delivers the best comfort and the highest energy efficiency. As a result, Integrity lowers fuel bills (up to 40% or more1) while creating comfortable, warm living spaces and nearly endless hot water for showers, kitchen, bath, and laundry.
And Built To Last
While other condensing boiler1 manufacturers cut corners to reduce production costs, the Integrity is constructed with five times more stainless steel. Therefore, it delivers a higher quality, higher efficiency, and a longer life boiler with minimal maintenance. In addition, most condensing boilers are built using low durability Euro and Asian designs constructed with expensive, hard-to-source parts which many result in long downtimes when you need it the most. Integrity is built in the USA with a proven, durable design and readily available parts.
Unparalleled Performance and Savings
Combining several of Energy Kinetics’ other Condensing Boilers’ breakthrough technologies, Integrity Outperforms All
Condensing Energy Manager
Intelligent By Design
The Brain (Smart Controls)
Known as the world’s smartest boiler, Energy Kinetics’ boiler technology outperforms and outlasts the competition. It’s the boiler with The Brain, our Energy Manager.
The Condensing Energy Manager maximizes home heating efficiency, cuts fuel bills and is perfectly integrated with our low mass boiler. It heats quickly, gets the job done, then searches for left over energy in the system and sends the remaining heat into your home or hot water storage tank.
The result is NO energy wasted!
Typical Condensing Boiler Issues: For contractor convenience, most boilers are set to run much hotter than needed which causes three boiler issues:
- Energy is wasted when the burner is running by allowing more heat to escape out of the venting from a hotter boiler and higher vent temperatures.
- Maintenance is increased as condensing slows to a halt and stops flushing contaminants out of the boiler. This fouls the boiler, leading to increased service calls or even premature boiler failure.
- More energy is wasted when the rooms reach their desired temperature and the burner turns off, wasting heat left in the boiler and system piping.
Problems Solved! These three condensing boiler problems are solved with Integrity’s boiler design and its simple, smart controls. With Integrity, contractors can set a very aggressive low operating “outdoor temperature reset” to optimize efficiency and maximize condensing operation, lowering fuel bills and allowing the cleanest operation. If any room is not heating quickly enough, SmartBoost™ prioritizes comfort by temporarily increasing the boiler’s temperature to make your home warm, therefore solving the first two issues. The third issue is solved when the Energy Kinetics’ Energy Manager anticipates the rooms will soon reach their desired temperature and the burner is turned off early. The Hybrid Energy Recovery® cycle then captures energy left over in the boiler and system and sends the remaining heat into your home, so no energy is left wasted in the boiler and your rooms are comfortably heated.
Inefficient Design
Old Fashioned Tank with Coil
Traditional boiler designs heat the entire water tank slowly, and waste energy every hot water cycle.
Efficient Design
Integrity with Advance Plate Heat Exchanger Integration
The Integrity heats water much faster, condenses through the full hot water cycle for cleaner operation, and recovers heat at the end of each cycle for the highest efficiency.
Water Flow
Delivering More Hot Water, Faster and with Less Energy
Plate heat exchangers are the best and most widely used way boilers make hot water in the world.
Our plate heat exchanger delivers continuous hot water with unmatched condensing by any combi boiler or indirect tank with coil. There are no studs to break or gaskets to leak with easy service union connections. Our Sealix® permanent non-stick coated surfaces prevent lime and mineral build up for exceptional long term performance in hard water applications.
Conventional condensing boiler designs are flawed for hot water.
- Typical combi boilers condense less than they should when heating and when making hot water. Because their hot water plate heat exchangers are undersized, these boilers foul faster leading to a shorter life.
- Typical boilers with hot water tank with coil systems are old fashioned and inefficient because the entire tank heats slowly. In addition, the temperature of the system’s boiler rises above the tank’s temperature, and when the tank eventually fully heats, the boiler and piping finish hot, wasting energy every hot water heating cycle.
By comparison, Integrity’s oversized plate heat exchanger heats the tank with the full output of the boiler, providing more hot water for showers, tubs, and spas. It condenses at a much higher rate for nearly the entire hot water cycle for cleaner operation, longer life, and more heat from less fuel. Energy Kinetics’ Energy Manager anticipates the tank is nearly completely heated and the burner is turned off early. The Hybrid Energy Recovery® cycle then captures energy left over in the boiler and piping and sends the remaining heat into your hot water storage tank, so no energy is left wasted in the boiler and your tank is fully charged. Simply Smarter.
Integrity is Designed for Long-term Reliability, Ease of Service, and High Efficiency
The System
Exceptional Boilers by Design
The engineers at Energy Kinetics have deconstructed every component of the conventional condensing boilers and used superior design and materials to produce a much higher efficiency design that delivers more hot water for longer. The design is also much more robust than conventional condensing, wall hung, and combi boilers that are prone to fouling and short life from tiny flue and water passes. With dozens of improvements over condensing boilers, you will understand why Integrity easily outlasts and outperforms the competition. These improvements include, but are not limited to the following:
- The Integrity vessel contains 45 pounds of high grade American made 316L stainless steel throughout, where competitors often use lightweight low grade materials that shorten the boiler’s life due to corrosive condensate exposure.
- The Integrity uses nearly all industry standard stock parts that are readily available and used on many brands of conventional boilers. Typical condensing boilers are packed with proprietary parts that often change with each new model year. If a part goes down, it could be weeks to get a replacement if they are even available at all.
- The Integrity‘s unique made in USA fire tube design is built to last with thicker and better materials and wide open water and flue passages. The Brain (Energy Manager) delivers the industry’s best condensing operation resulting in higher efficiency and cleaner operation contributing to reduced maintenance and a longer service life.
- Low pressure drop, wide open water passes deliver enhanced heat transfer. This combines with super turbulators for more reliable operation with more condensing. To cut costs, competitors’ designs are so restrictive that they need special external piping and additional pumps that actually prevent condensing operation. Competitors’ flawed designs lead to premature fouling and failure while wasting energy.
- Unique to the Integrity, it has 37 specially formulated stainless steel super turbulators that provide maximum condensate production and efficiency, for longer and cleaner operation with lower fuel bills. These allow fully serviceable access, where typically condensing boilers have inaccessible flue passes which can foul and cause premature failure. These tiny passes are so small some manufacturers recommend cleaning them with a credit card.
- The advanced plate heat exchanger optimizes hot water production and allows condensate to pour out, keeping the boiler clean and saving energy. Other’s tiny plate heat exchangers or tank with coil designs often only dribble out condensate, increasing fouling and reducing efficiency and longevity.
- The Integrity’s enclosure provides full and easy access to controls, burner, and boiler, making it the most maintenance friendly design available.
- Hard water? Our exclusive Sealix® non-stick surface prevents scale buildup. Add a scale stopper for reliable operation in even harder water applications (up to 25 grains of hardness) without cleaning.
Built For A Lifetime
With Industry Standard Parts
Typical boilers made decades ago were built to last and had industry standard parts, so if a part failed, the boiler could be up and running quickly. Energy Kinetics has always taken this approach. Contrast that with today’s modulating condensing boilers that are built with complex specialized controls and components that are often redesigned every year or two. This means parts are often not available, even shortly after the installation is complete. Combined with a Design for Manufacturing process that makes these lightweight condensing boilers cheaper, homeowners can be left without heat or hot water for weeks or more and contractors may recommend full boiler replacement instead of a costly delayed repair.
The Answer: The Integrity boiler is easily serviced with standard stock parts, on board diagnostics, and automated bypass functions so heat can be quickly restored in the unlikely need of a replacement part. Energy Kinetics’ proven 30 year pressure vessels and deep inventory of parts also means peace of mind for years to come.
Heat & Hot Water Boiler
Traditional Wall Hung Boiler
How does the Integrity Condensing Boiler compare?
Residential Lifetime Limited Warranty with high grade stainless steel pressure vessel. Plus Lifetime Warranty Transfer to a new owner!
Nearly all components are industry standard “off the shelf”parts, not custom special order items that can take weeks or longer to replace in the middle of winter.
Nearly all others are Euro and Asian lightweight designs, often branded by US companies. These have a reputation of fouling and failing in the field.
The storage tank is optimized to provide the best hot water condensing operation, and recover energy after the burner turns off – all other condensing boilers finish hot. Integrity Combi’s oversized heat exchanger condenses more for higher hot water efficiency than other combis.
Full access, wide open flue passes and water flow paths for long life and easy service. Others mod cons have flue passes so small that a credit card is a tight fit, a recipe for shortened life.
Top AFUE rating, plus thermal purge and exceptionally low idle loss to out perform all other condensing boilers, while simultaneously delivering more comfort faster.
Squeezes more heat out of the fuel and into your home than non-condensing boilers.
Automatically adjusts to make your home warm and comfortable. Others rely on temperature reset alone, which only responds quickly if it is set to run inefficiently.
The solid state Condensing Energy Manager carries a 5-year warranty and an extended protection plan for the life of your Integrity boiler.
More Reasons Why Homeowners Love Integrity Condensing Boilers
Heat and Hot Water Boiler Efficiency
The above chart illustrates how low mass and thermal purge deliver the best efficiency. Integrity improves on the best real efficiency of all tested systems with even higher combined system performance.1
Top Performing Heat and Hot Water Boiler Design Features
More Savings
Integrity’s advanced condensing gas boiler technology combines with a high performance storage tank for exceptionally low idle loss with up to 95.2% AFUE performance and the best heat and hot water efficiency. Other systems higher idle loss causes annual heat and hot water efficiency to fall from their AFUE rating, as idle loss is ignored by all other boiler manufacturers. The Integrity boiler runs more intelligently and adapts more swiftly to changing demands. As a result, the Integrity boiler system delivers bigger fuel savings (greater efficiency) in every area of heat and hot water production.
Venting
Chimney, Through the Roof, or Sidewall Direct Venting
Installations can be vented with polypropylene in a variety of chimney and sidewall configurations.
Air Removal
Ultra quiet burner operation combined with…
Built in air elimination is included for quieter heating system operation.
Additional Benefits
- Proudly Made in USA!
- Whisper Quiet
- Nearly Endless Hot Showers
- Natural Gas or Propane, Easy to Convert
- Convenient Wall or Floor Mount
- SmartBoost for Better Comfort
- Built-in Auto Express Setup
- Cuts Up to 40% or More Off the Home Heating Bills
- Gas Protection Alarm included with every gas system
- 5 zone control including hot water
Get Our Brochure
Learn more about the Integrity boilers and make an educated decision about your heat and hot water.
Integrity = Reducing Your Monthly Fuel Bills Up To 40% or More1
Lower Your Fuel Bills While Enjoying Nearly Endless Hot Water
If you want to lower monthly fuel bills, enjoy whisper quiet operation and get the security of the industry’s best lifetime limited warranty, give Energy Kinetics a call at 908-735-2066 or email and put Energy Kinetics’ boilers’ proven track record to work heating your home or business and start saving today!
Sealix® Plate Heat Exchanger
New Plate Heat Exchanger technology delivers exceptionally long-term performance in hard water applications.
Introducing Sealix®
A Simple and Profound Advancement in Water Heating Technology
Plate heat exchangers are subject to the laws of nature, and hard water can plate out and foul hot domestic side surfaces over time. This can be cleaned like a tankless coil, but there are better ways to provide reliable and long lasting performance. A scale stopper or full water treatment system can keep the minerals in solution and prevent fouling so the plate heat exchanger can stay clean for years to come.
Now, technology brings an even better advancement. The laws of nature didn’t change, but our Sealix permanent non-stick surfaces prevent lime and mineral build up for exceptional long term performance in hard water applications.
Double the Benefits with Sealix.
Corrosion-resistant stainless steel is bonded with corrosion proof non-stick Silicon Dioxide for remarkable performance in preventing lime and mineral build-up in hard water applications.
How It Works
This Silicon Dioxide is bonded to the stainless steel, creating a barrier against fouling, scaling, and corrosion that’s durable even under extreme temperatures and pressures. This coating is ideal for preventing corrosion even in pool heating applications with salt and chlorine. It’s so robust it is used in high tech nuclear, medical, and industrial applications dealing with acids and other corrosive chemicals.
Exclusively in Energy Kinetics’ Boilers
We’re exclusively offering Sealix coated heat exchangers as an exceptional solution for all your hard water and pool applications. It’s available today on shipments from New Jersey on our Ascent™ Combi and Resolute™ boilers, and on EK1 and EK2 System 2000® Frontier boilers with the #14 and #18 heat exchanger models.
We recommend a scale stopper for domestic water up to 25 grains of hardness as it very cost-effectively brings water conditioning benefits to the entire home.
High Flow™ Tanks – impervious to water quality variations.
High Flow thermoplastic tanks are an exceptional complement to Sealix bonded heat exchangers, offering an unmatched combination for long term reliability and performance. Available in 55, 80, and 120 gallon sizes, there is no anode rod and no maintenance required.
System Benefits
MultiFuel
Energy Kinetics’ family of products, Frontier EK1, EK2 and EK3, and 90+ Resolute™ run on natural gas, oil heat, propane or bioheat (B5) fuel sources and can be converted between fuels with a simple burner change. The rest of the system stays the same—this includes the boiler, water heater, thermostats, zones, Digital Energy Manager and more. In some cases a flue liner change may be required. The Accel CS™ may be converted between natural gas and propane with a simple orifice change.
Ahh, Comfort Beyond Nearly Endless Hot Showers…
Energy robbing draft regulators and draft hoods used with conventional boilers and furnaces are eliminated with the advanced design of all Energy Kinetics’ heating systems. These devices draw in outside air through windows, doors, and any areas air can infiltrate, making homes and buildings draftier and less comfortable while increasing fuel consumption to heat this air. This also increases air conditioning loads in the summer for hot water systems and boilers that run year round.
Further adding to your savings and comfort, outside combustion air may be piped directly to System 2000, 90+ Resolute and Accel CS.
And Energy Kinetics’ Hybrid Energy Recovery® anticipates the end of thermostat calls, turning off the burner sooner and keeping your baseboard or other radiation warm longer for gentle heat and comfort at your thermostat setting.
Clean, Efficient, Safe
Clean
With either gas or oil heat units, the modern boiler design and combustion chambers of the System 2000, 90+ Resolute and Accel CS insure thorough, clean combustion. All Energy Kinetics’ heating systems burn so cleanly, they can offer a through-the-wall venting option compatible with natural gas, propane, bioheat (B5) or heating oil, even if no chimney is available.
Efficient
With so many efficiency enhancing features (not currently calculated in the AFUE ratings) such as a low mass design, superior insulation and Hybrid Energy Recovery® control, all Energy Kinetics’ heating systems clearly outperform other units which may have “comparable” AFUE ratings.
Safe
All Energy Kinetics’ heating systems incorporate all necessary safety controls and have an additional safety check for potential problems with chimneys and venting. With the system connected to a security system, homeowners and business owners can have peace of mind with 24/7 monitoring even while away.
Specially Formulated Steel Construction
Specially Formulated Steel Construction
…a modern solution to today’s heating needs. Nearly 30 years of field experience and precision engineering combined with true commercial grade construction on all System 2000, 90+ Resolute and Accel CS models all add up to proven performance and reliability.
Compare construction of all Energy Kinetics’ heating systems to cast iron boilers: System 2000 and 90+ Resolute steel is typically 50% stronger than cast iron. It’s ductile, flexible, and easy to weld into complex shapes. It heats up rapidly, expands and contracts easily, and is highly resistant to temperature shock. It’s simply a better material for hot water boilers—combined with their commercial grade construction, System 2000 and 90+ Resolute outshine all cast iron and other steel designs. [Read More about Cast Iron]
The Accel CS uses high grade 316L stainless steel to out last aluminum and other grades of stainless steel in condensing boiler operations.
Whisper Quiet
Did you hear that?
Probably not if it’s an Energy Kinetics’ boiler. In fact, our systems are as quiet as 38 decibels, making them virtually silent. Compare that to the 62 decibels of typical boilers, which make it hard to hear a conversation. A difference of just a few decibels may not seem to be much, but a boiler that is just one decibel more is actually 30 percent louder. A boiler that is four decibels more is twice as loud.
For natural gas, oil, or propane, System 2000, Resolute RT™, Accel CS™, Ascent™ Combi, Ascent™ Plus Combi, Integrity™ and Integrity™ Combi all lead the industry in noise control. Flue products travel over 10 feet in a System 2000 and over 15 feet in a Resolute before exiting into the flue (and an amazing 18 feet on the larger EK3 models). And all models feature an air intake connection that wraps and silences burner sounds. These features are unique compared to other home heating systems.
Virtually Silent
Homeowners often compliment Energy Kinetics’ industry leading design by asking to hear the boiler run on the day of a new install…only to find out that it was already running! Now that’s quiet!